Water Purification
Water Purification
Devices, filters, cartridges, accessories, and other supplies for use in the purification of water. Products include consumables and replacement parts for use with a variety of water purification systems.
Source or feed water may be tap water, water that is pre-treated by the system, or pretreated water that is drawn from a reservoir or tank. Water systems typically produce water rated as Type I, II, III, or IV.
Type I or ultrapure Type I water is defined by resistivity and TOC levels (total organic compounds, measured in parts per billion (ppb). Type I water is required for ICPMS, AAS, FAAS, GFAAS, HPLC, IC, and ICPAES methods, molecular biology, cell and tissue culture, electrochemistry, and electrophoresis.
Type II water is suitable for ELISA and RIA test methods, buffer and reagent preparation, and spectrophotometry. It also has a specific requirement for resistivity. Type III water is used for media preparation, glassware washing and rinsing, and other non-critical applications. Type IV water is typically used as feed water for Type I and Type II water purification systems.
Replacement water purification parts – filters and cartridges – are key components of these systems and must be changed according to specifications to maintain the promised water quality.
Filtered Search Results
Thermo Scientific™ Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Sterile filter for use with Barnstead™ water purification systems; can be autoclaved up to 5 times.
Thermo Scientific™ Barnstead™ GenPure™
Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with this water purification system.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055μS/cm |
Particles >0.2µM/mL | <1 |
Feedwater Source | Pretreated |
Width (Metric) | 372 mm |
Flow Rate | Up to 2 L/min. |
Type | Water System |
Feedwater Connector | R 3/4 in. |
Depth (Metric) | 330 mm |
Product Water Type | Type 1 |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ RO System
This product has been discontinued. For additional information or alternate products please contact your sales representative.
Contaminant Rejection (Organic) | 99% |
---|---|
Contaminant Rejection (Particulate) | 90 to 95% |
Width (English) | 13.5 in. |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Tap |
Contaminant Rejection (Microbiological) | 99% |
Width (Metric) | 34.3 cm |
Silica | <30ppm |
Product Water Type | Ultrapure (Type 1) |
Voltage | 100/240 VAC |
Turbidity | <1.0 NTU |
pH | Optimum Range: 6.5 to 7.5, Operating Range: 4 to 11 |
Certifications/Compliance | CE, CSA |
Height (English) | 19.5 in. |
Feedwater Pressure | 30 to 100 psig (2 to 6.9 bar) |
Height (Metric) | 49.5 cm |
Max. TDS as CaCO3 | 800 ppm |
Iron Total as Fe | <0.5ppm |
Electrical Requirements | 100/240 VAC 50/60 Hz |
Chlorine Tolerance | 1000 ppm/hr. |
Depth (English) | 16.9 in. |
Resistivity | 18.2MΩ·cm |
TOC Monitor with UV Intensity Monitoring | No |
Type | Reverse Osmosis System |
Contaminant Rejection (Minimum Ionic) | Monovalent: 90 to 95%; Polyvalent: 95 to 99 |
Silt Density Index | <5% |
Depth (Metric) | 42.9 cm |
Frequency | 50/60 Hz |
Temperature Range (English) | 34°F to 95°F |
Temperature Range (Metric) | 1°C to 35°C |
Bacterial Content | 99% |
Feed Water Monitoring | No |
Thermo Scientific™ Barnstead™ GenPure™ xCAD Water Purification System
This item is no longer available. The recommended replacement is Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055 µS/cm |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Pretreated |
Width (Metric) | 372 mm |
Flow Rate | Up to 2 L/min. |
Type | Water Purification System |
Feedwater Connector | R 3/4 in. |
Depth (Metric) | 330 mm |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Remote Dispenser | Yes |
Bacterial Content | <1 CFU/mL |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ Classic Stills
Remove inorganic solids, organics, bacteria and pyrogens from your water with Thermo Scientific™ Barnstead™ Classic Stills.
Frequency | 50/60 Hz |
---|---|
Certifications/Compliance | UL, cUL |
Fisherbrand™ Accu20 Ultrapure Water System
Fisherbrand™ Accu20 Ultrapure Water System used to produce Type I ultrapure water and RO water on demand from tap water directly.
Feedwater Pressure | 15 to 90 psi (1 to 6 bar ) |
---|---|
Height (Metric) | 48 cm |
Flow Rate | RO water (at 25°C ): >0.5L/min.; Ultrapure water ( Type I ) (at 25°C ): >0.5L/min. |
Depth (English) | 20 in. |
Length (Metric) | 30 cm |
Depth (Metric) | 51 cm |
Resistivity | 18.2 Mohm.cm |
Length (English) | 76.2 in. |
Model | Accu20 |
Conductivity | RO water at 25°C: Typically <20μS/cm |
Temperature Range (Metric) | 5°C to 45°C |
Height (English) | 18.8 in. |
Fisher Scientific™ Accu100 Ultrapure Water System
Ultrapure water for critical laboratory applications. Fisherbrand™ Accu100 Ultrapure Water System used to produce Type I ultrapure water from RO, distilled or deionized water.
Particle Size | <1/mL |
---|---|
Height (Metric) | 44 cm |
Flow Rate | 1.0 to 1.5 L/min. at 25°C |
Length (Metric) | 21 cm |
Depth (Metric) | 35 cm |
Resistivity | 18.2 Mohm.cm at 25°C |
Length (English) | 8.26 in. |
Model | Accu100 |
Feedwater Source | Distilled, DI, RO, EDI |
Temperature Range (Metric) | 5°C to 45°C |
Bacterial Content | <0.1 CFU/mL |
Height (English) | 17.3 in. |
Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System
Convert tap water into high-purity water with the Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System, a complete solution integrating purification and tank.
Operating Pressure | 2 to 6 bar |
---|---|
Height (Metric) | 1500 mm |
Net Weight (Metric) | 66 kg |
Resistivity | 10 to 1 Mohm.cm |
Conductivity | 0.1 to 1.0μS/cm |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 450 mm |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 580 mm |
Product Water Type | Type 2 |
Temperature Range (Metric) | 2°C to 35°C |
Bacterial retention | 99% |
Feed Water Monitoring | No |
Fisherbrand™ ACCU500 Water Purification System
Produces ultrapure and reverse osmosis water from tap water directly with no additional pre-treatment filters.
Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System, with Installation
Simultaneously dispense Type 1 ultrapure water from up to three dispensers using the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus system.
Operating Pressure | 0.1 to 6 bar |
---|---|
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Depth (English) | 13 in. |
Width (English) | 14.6 in. |
Resistivity | 18.2 Mohm.cm at 25°C |
Conductivity | 0.055µS/cm |
Particles >0.2µM/mL | <1 |
Width (Metric) | 372 mm |
Total Organic Carbon | 1 to 5 ppb |
Flow Rate | Up to 2 L/min. |
Feedwater Connector | 3/4 in. |
Depth (Metric) | 330 mm |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Bacterial Content | <0.1 CFU/mL |
Height (English) | 24 in. |
Feed Water Monitoring | Integrated |
Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System with Installation
Convert tap water to ASTM Type 1 water with the compact, all-in-one Thermo Scientific™ Barnstead™ Smart2Pure™ water system. This complete system produces 3 or 6 liters of ultra-pure water per hour. The Smart2Pure 3 and 6 feature a built-in 6L reservoir to store the Type 2 water, while the Smart2Pure 12 offers the choice of a 30 or 60L reservoir for customizable storage capacity.
Operating Pressure | 1 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 545 mm |
Electrical Requirements | 100/240 V 50/60 Hz |
Net Weight (Metric) | 22 kg |
Resistivity | Type 1: 18.2 Mohm.cm at 25°C; Type 2: 10 to 15 Mohm.cm at 25°C |
Conductivity | Type 1: 0.055μS/cm |
Particles >0.2µM/mL | <1 |
Feedwater Source | Tap |
Endotoxin Concentration | 0.005 EU/mL |
TOC Monitor with UV Intensity Monitoring | No |
Total Organic Carbon | 1 to 5 ppb |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 400 mm |
Product Water Type | Type 1 |
Voltage | 100/240 V |
Frequency | 50/60 Hz |
Power Consumption | 0.06 kW |
Bacterial Content | <0.01 CFU/mL |
Bacterial retention | 99% |
Feed Water Monitoring | No |
Thermo Scientific™ Barnstead™ GenPure™ Pro Water Purification System UV with Installation
Suitable for the most demanding laboratory applications, the Barnstead™ GenPure™ Pro water purification system delivers ultrapure 18.2 megohm-cm water with consistent quality.
Operating Pressure | 2 to 6 bar |
---|---|
Height (Metric) | 615 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Depth (English) | 18.6 in. |
Width (English) | 13 in. |
Resistivity | 18.2 Mohm.cm |
Conductivity | 0.055µS/cm |
Particles >0.2µM/mL | <1 |
Width (Metric) | 330 mm |
Total Organic Carbon | 1 to 5 ppb |
Flow Rate | Up to 2 L/min. |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 472 mm |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.1 kW |
Height (English) | 24.2 in. |
Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System
Convert tap water into reverse osmosis water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 Bar |
Height (Metric) | 1500 mm |
Net Weight (Metric) | 50 kg |
Particles >0.2µM/mL | <1 μM/mL |
Feedwater Source | Tap |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 450 mm |
Silica Removal | 98% |
Type | Reverse Osmosis Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 580 mm |
Frequency | 50/60 Hz |
Temperature Range (Metric) | 2°C to 35°C |
Power Consumption | 0.25 kW |
Bacterial Content | 99% |
Feed Water Monitoring | Yes |
Thermo Scientific™ Barnstead™ LabTower™ EDI Water Purification System
Stock high purity water safely and conveniently with the integrated 100L reservoir of the Thermo Scientific™ Barnstead™ LabTower™ EDI Water Purification System.
Operating Pressure | 2 to 6 bar |
---|---|
Feedwater Pressure | 1 to 6 bar |
Height (Metric) | 1500 mm |
Electrical Requirements | 90/240 V 50/60 Hz |
Description | LabTower EDI 15L/hr. with integrated 100L tank |
Net Weight (Metric) | 58 kg |
Resistivity | Type 1: 18.2 Mohm.cm at 25°C; Type 2: 10 to 15 Mohm.cm at 25°C |
Particles >0.2µM/mL | <1 |
Feedwater Source | Softened or hardness stabilized |
TOC Monitor with UV Intensity Monitoring | No |
Width (Metric) | 450 mm |
Total Organic Carbon | 1 to 5 ppb |
Flow Rate | 1.5 L/min. |
Type | Water Purification System |
Feedwater Connector | 3/4 in. NPT |
Depth (Metric) | 580 mm |
Product Water Type | Type 1 and 2 |
Voltage | 90/240 V |
Frequency | 50/60 Hz |
Power Consumption | 0.25 kW |
Bacterial Content | <0.1 CFU/mL |
Bacterial retention | 99% |
Feed Water Monitoring | Yes |