missing translation for 'onlineSavingsMsg'
Få mere at vide
  1. Home
  2. Products
  3. Pumps
  4. Peristaltic Pumps
  5. 11947835

Ismatec™ IPC-N 8 Peristaltic Pump

Artikelnummer. 11947835
Klik for at se tilgængelige muligheder
Flow Rate:
0.0004 to 11 mL/min.
Pakningsstørrelse:
Each
Denne vare kan ikke returneres. Se returpolicy

Artikelnummer. 11947835

Brand: Ismatec™ ISM936D

Please to purchase this item. Need a web account? Register with us today!

This item has been discontinued and is no longer available. View the product for possible alternatives or contact our Technical Support team on 056 260 260 for assistance.
 Se alternative produkter

Denne vare kan ikke returneres. Se returpolicy

Beskrivelse

Combine tubing sizes and formulations to suit your application. Ismatec™ IPC-N Peristaltic Pumps feature automatic occlusion for simplified use, fewer tubing changes and reproducible results.

Multichannel programmable pumps feature planetary gears that drive eight stainless steel rollers in unison for smooth rotation and accurate liquid flow.
  • The four-digit LED display shows flow rate or rpm when pump is running
  • Use the MAX button to instantly increase speed for priming or flushing without disturbing your programmed settings
  • Click’n’go™ cartridges feature automatic occlusion for simplified use, fewer tubing changes, and reproducible results
  • Adjustable occlusion cartridges are available separately
  • Install cartridges in one direction for low pulsation; in opposite direction for higher counter pressure
Ideal for continuous pumping or for dispensing in any of five modes:
  • Flow rate: 0.0004 to 11 mL/min (depending on tubing size used)
  • By time: 0.1 seconds to 999.9 hours
  • Batches: set delay between dispensed volumes
  • Drip-free: program back-steps to prevent drips
  • Volume displays in mL or μL
Pumps feature analog input and output controls, as well as an RS-232 interface for control by a computer.
Remote control capabilities: RS-232 to control all operating functions (DB9 male); 0 to 5 VDC, 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA for start/stop and autostart via contact closure (DB15 male); footswitch (three-pin DIN port). Monitor speed via analog output.

Tekniske data

Certifications/Compliance CE Compatibility (EN 61326-1/EN 61010-1), ETL Compatibility (UL 61010A-1 & CAN/CSA C22.2 No. 1010-1)
Channels 8
Description 2-stop color-coded
Control Type Variable Speed
Display Type LED
Enclosure Rating IP30
Flow Rate 0.0004 to 11 mL/min.
Maximum Pressure 14.5 psi (Differential)
Motor Speed 11.25 rpm
Reversible Yes
Finish Paint
Includes Click-n-go Cassettes (POM-C), Driver for LabView Software, Foot Switch, Operating Manual, Power Cord with an IEC 320 Country Specific Female Connector Mains Plug x 1
Material Stainless Steel (Case)
Model IPC-N 8 Peristaltic Pump
Motor Type DC
No. of Rollers 8
Temperature (English) Max. 104°F
Temperature (English) Min 41°F
Temperature (Metric) Max 104°F
Temperature (Metric) Min. +41 °F
Dimensions (L x W x H) 220 x 175 x 130 mm
Overall Length (Metric) 175.26 mm
Overall Width (Metric) 220.98 mm
Overall Height (Metric) 129.54 mm
Voltage 115/230 VAC
Wattage 30 w
Frequency 60 Hz
Vis mere Vis mindre
Korrektion af produktindhold

Dit input er vigtigt for os. Udfyld denne formular for at give feedback relateret til indholdet på dette produkt.

Produkttitel

Ved at klikke på Send, anerkender du, at du kan blive kontaktet af Fisher Scientific med hensyn til den feedback, du har givet i denne formular. Vi deler ikke dine oplysninger til andre formål. Alle angivne kontaktoplysninger skal også vedligeholdes i overensstemmelse med vores Privatlivspolitik.

Mange tak! Din feedback er blevet sendt. Hos Fisher Scientific arbejder vi altid på at forbedre vores indhold for dig. Vi sætter pris på din feedback.